Glass Condition
Scratches, chips, coatings, seals, tint, laminates and previous film.
Project Support
Smart Film Measurement Guide
Use this checklist for initial project review. A qualified local installer must verify final production dimensions.
Measure Each Panel Separately
Identify
Give every glass panel a unique reference such as A1, A2, B1 or Conference-01.
Record
Record width and height for each panel using one unit system consistently.
Document
Photograph the full panel, edges, frame, nearby power location and any obstruction.
Verify
Have the local installer confirm final measurements, clearances and installation conditions.
Measurement Schedule
| Panel ID | Width | Height | Glass / frame notes | Power-entry preference |
|---|---|---|---|---|
| A1 | — | — | — | Top / bottom / left / right |
| A2 | — | — | — | Top / bottom / left / right |
Also Confirm
Edge Access
Available edge, frame depth, gasket or sealant and cable concealment.
Environment
Indoor use, moisture exposure, temperature, direct sun and cleaning conditions.
This guide supports quotation and feasibility review; it is not a substitute for final field verification.